Another New Kit...Love,Hate. Deep Blues and Black with a few touches of White. There is 53 Elements and 20 Papers in this kit. Not all shown in preview. Tagger Size and Personal Use only. This kit will be available in stores later today.

♥Kelly

Jenny has done it again..Look at this Hot Tag she created using my Paparazzi kit! I love it sweetie tysm ♥ Check out the tutorial for this awesome tag HERE

My bestie Cazie made this hot tag for me using my Lover's Revenge kit. I love it! tysm Cazie.
Check out the tutorial HERE

New kit by me called Dark Inspiration. All done up in Red and Black. 53 Elements,20 Papers. A must buy for any gothic lover. This is a Tagger Size Kit and Personal Use Only!

♥Kelly

Jen made this awesome tag for me using my Paparazzi kit. She did a fabulous job!! I so love this tag :) Check out the tutorial HERE

It's been awhile since my last freebie. I'm on a Alpha kick lol so be prepared to see lot's more. This freebie contains letters A-Z all uppercase. Pink Glitter w/ Black outline and a clear sticker effect. This can used as Commercial Use or Personal Use. Credit is always required. Hope ya like! You can Grab this Freebie HERE

~♥Kelly

These blinkies was made for a sweet guy and a great friend of mine Stu.

All of my tutorials require a working knowledge of PSP! This tutorial was written by me on June 11,2010. It is of my own ideas and creation! Any other tutorials found to be similar is coincidental.

Supplies Needed

Scrapkit of Choice
I'm using a Wonderful kit called My Hero,made by Foxy's Designz. This is a PTU kit i cannot supply. You can grab this awesome kit here

Tube of Choice
I'm using the Wonderful work of Keith Garvey. You must have a license to use his work! You can purchase that here

Let's Begin
Open new image 600x600,Flood fill white.
Pick 3 papers of choice.
Copy and paste each paper and apply the same mask for each one.
Merge group on mask layer for each paper.
Use your Deform Tool to squeeze each mask a little to make the others show up.
Copy and paste Soldier,Resize to your liking.
Place toward top middle of tag.
Add dropshadow of choice.
Copy and paste Tube of choice,Resize 90%.
Place like mine.
Copy and paste Army,Resize to your liking.
Place like mine,Add a heavy dropshadow.
On your tube layer,Duplicate.
Move the original below the army element.
Take your Eraser Tool and remove parts of the tube on the duplicated layer like mine.
Add Dropshadow of choice.
Copy and paste Ribbon4,Resize 20% or less.
Place like mine and add a dropshadow.
Copy and paste Tag1,Resize to your liking and place at the bottom of army.
Add dropshadow of choice.
Copy and paste Bullet,Resize 15-20%.
See mine for placement and add a dropshadow of choice.
Duplicate, Take your Deform Tool and rotate the bullet and place next to the other one.
Copy and paste Teddy1,Resize to your liking.
Place on the left side of the Tag.
Add dropshadow of choice.
Now Add Your Name and CopyRight Info!
All done.

All of my tutorials require a working knowledge of PSP! This tutorial was written by me on June 11,2010. It is of my own ideas and creation! Any other tutorials found to be similar is coincidental.

Supplies Needed
Scrapkit of Choice
I'm using a Wonderful kit called I Can't Be Tamed,made by Tammy's Scraps. This is a PTU kit i cannot supply. You can grab this awesome kit here

Tube of Choice
I'm using the Wonderful work of Elias Chatzoudis. You must have a license to use his work! You can purchase that here

Let's Begin
Open new image 600x600,Flood fill white.
Copy and paste Paper7,Apply mask of choice.
Merge Group on mask layer.
Copy and paste Paper2,Apply same mask as before.
Merge group on mask layer.
Take your Deform tool and on paper2 move in a bit so you can see the other one.
Copy and paste Frame3,Resize to your liking.
Take your Magic Wand tool and click inside the frame,make sure you click in the smaller sections too.
Selections,Modify,Expand by 2.
Selections,Invert.
Copy and paste Closeup Tube of choice,Resize 90%.
Copy and paste a paper of choice below the close up tube.
Now hit delete on both paper and close up tube on your keyboard.
Selections,Select none.
Copy and paste Doodle2,Resize to your liking.
Image,Mirror,Image,Flip.
Place like mine,add dropshadow.
Copy and paste Word1,Resize 40%.
Place on the left side of the frame like mine.
Copy and paste both Skulls,Resize to your liking and see mine for placement.
Copy and paste Candle2,Resize 20-30%.
Place at the bottom of frame and add a dropshadow.
Copy and paste flower1,Resize to your liking.
Place next to candle,Add dropshadow.
Copy and paste another tube of choice if you want too.
Resize 90%,Place like mine and add a dropshadow of choice.
Now Add Your Name and CopyRight Info!
All done.

Check out this AWESOME! tutorial wrote up by Carol using my Rocker Chick Kit. Check out the Tutorial HERE

Thanks Carol i so love this tag!!

♥Kelly

All of my tutorials require a working knowledge of PSP! This tutorial was written by me on June 11,2010. It is of my own ideas and creation! Any other tutorials found to be similar is coincidental.

Supplies Needed

Scrapkit of Choice

I'm using a Wonderful kit called Magenta Sky,made by Created By Jill. This is a PTU kit i cannot supply. You can grab this awesome kit here

Tube of Choice

I'm using the Wonderful work of Elias Chatzoudis. You must have a license to use his work! You can purchase that here

Let's Begin

Open new image 600x600,Flood fill white.

Copy and paste Paper5,Apply mask of choice.

Merge Group on mask layer.

Copy and paste Paper10,Apply same mask as before.

Merge Group on mask layer.

Take your Deform Tool and on the 2nd mask move it in a bit so the other shows up.

Copy and paste GlitterSpill1.

Copy and paste bricks,Resize to your liking.

Add light dropshadow of choice.

Copy and paste GlitterCircles,Place like mine.

Copy and paste LicensePlate,Resize to your liking.

Take your Deform Tool and rotate to the left,See mine for placement.

Copy and paste Leaves2,Resize 65%,Place on top of licenseplate.

Add dropshadow of choice.

Copy and paste gemtree,Resize to your liking.

Place on the right side of tag.

Use your eraser tool and remove the bottom of the gemtree.

Add a light dropshadow of choice.

Copy and paste tube of choice,Resize 90%.

Add light dropshadow of choice.

Copy and paste bow2,Resize 40%.

Place on the bottom of the license plate.

Add light dropshadow.

Copy and paste Butterfly,Resize 30%.

Take your deform tool and rotate to the right.

Place on the top left corner of license plate.

Add dropshadow of choice.

Now Add Your Name and CopyRight Info!

All done.

My new blinkie..Kit used is called Diva Style made by Gothic Inspirations.

All of my tutorials require a working knowledge of PSP! This tutorial was written by me on June 10,2010. It is of my own ideas and creation! Any other tutorials found to be similar is coincidental.

Supplies Needed

Scrapkit of Choice

I'm using a Wonderful kit called Get Out,made by Gothic Inspirations. This is a PTU kit i cannot supply. You can grab this awesome kit here

Tube of Choice

I'm using the Wonderful work of Keith Garvey. You must have a license to use his work! You can purchase that here

Let's Begin

Open new image 600x600,Flood fill white.

Copy and paste Mesh,Resize 65%.

Copy and paste Old Paper,Resize 65%.

Copy and paste Window2,Resize to your liking.

Place to the right of the tag.

Copy and paste BrokenGlass,Resize 60%.

Place on the window,Take your eraser tool and remove parts on the window.

Copy and paste Labels2,Resize to your liking.

Place on the right side of the window.

Copy and paste Print,Resize 20%,Place on the window like mine.

Change the Opacity to 70-75%.

Copy and paste Web2,Resize to your liking.

Place on the window to the left.

Copy and paste Netting,Resize to your liking.

Place on the top left side of tag.

Duplicate,Image,Mirror,Image,Flip.

Copy and paste tube of choice,Resize 90%.

Add a light dropshadow and place between the window and label.

Copy and paste Pent1,Resize 40%,Place on the right side of window.

Add dropshadow of choice.

Copy and paste Smudge,Resize 40% or to your liking.

Place at the bottom of your tube and move to the left.

Duplicate,Image,Mirror,Move into place.

Copy and paste Smoke,Resize to your liking.

Change the Opacity to 70%,See mine for placement.

Copy and paste Vine2,Resize to your liking.

Take your Deform Tool and Rotate the vine,Place like mine.

Copy and paste Bottle,Resize 40%,Place like mine.

Add dropshadow.

Copy and paste Blood wine,Resize 40%,Place in front of bottle.

Add dropshadow.

Copy and paste Syringe,Resize 40%,Place at the bottom of the BloodWine.

Add light dropshadow.

Now on the Label,Right in your own words or use mine.

(I used Broken Ghost font)

Add Your Name and CopyRight Info!!

Copy and paste Paper17 below all layers,Apply mask of choice.

Merge Group on mask layer.

All done!

Here's yet another Commercial Use Pack for you to use in your gothic/grungy kits. This pack has 18 Elements and 8 papers. Perfect for all those dark kits! Will be available in all my stores tonight!!

♥Kelly

You have to check this one out! All of her CU items excluding Clipart,Posers and Kits will soon become Cu4Cu to anyone who purchases a Lifetime CU4CU license from Heartfelt Perfections!! Leigh has loads and loads of cu packs available right now! And so many more to come!! It's a must buy!! You must purchase her CU packs seperately. Her CU4CU License will be available tonight in all her stores listed below!!

My bestie Cazie made this awesome tag for me using my Fire kit. Check out her tutorial for this tag HERE

Check out my kits at any of my stores to see if you would be interested in joining. I need active people to work with my kits. If interested email me.

♥Kelly

Here's my newest Commercial Use Goth Element Pack. Available in Tagger Size Only. Will definitly add a little something to any of your gothic/grunge kits. Will be in stores tonight! This Pack has 17 elements in it. Hope you like,

♥Kelly

Sorry for putting mine up so late,I have strep throat and just feel icky. One good thing on this is my IE is now working again!! Woot Woot!! Anyway lol.

Be sure to follow the rest of the train,there's some awesome designers who have joined in on this CU blog train. Please be sure to leave a thank you apon downloading from each designer,a thank you goes a long way. Alot of work was put into this one. U can grab my part HERE

Amanda with: Amanda Kelleher

Kelly with: Angel's Designz-----> U ARE HERE

Julie with: Bits N Bobs

Candy with: Candys Treasures

Jill with: Created By Jill Scraps

Stuart with: Creative Crazy Scraps

Muriel with: Creative-Disorder

Dani with: Darkmoon's Dream

Sarah with: Designs by Sarah

Pia with: Digital Blue Print

Conchi with: DNScraps

Foxy with: Foxys Designz

Jessica with: Gothic Inspirations

Brandi with: Grunge & Glitter

Hezalin with: HezaScraps & Tags

Mystee with: intoxxikate Intentionz By Mystee

Victoria with: Maitris Digital Scraps

Sally with: Mythical Designs

Angel with: Naughty Angels Creations

Nette with: Nette's NightOwl Works

Jessica with: Scraps by Jessica

Sky with: Sky's Scraps

Kara with: Sweet Cravings Scraps

Alyson with: Tygers Tidbits

Judy with: Winter's Loft